線切割模組

AUTO-Wire offers a substantially easier method of programming wire EDM to its full capacity using even the most advanced features.

Machining times and finishes are optimised by the choice of multiple approach and retraction strategies. Bridges for final part removal and clearance, as well as facilities to repeat machining operations, allow fully automated technological sequences to be set up for overnight or unmanned operations.

Details that count :

•Simple surface creation to produce varying draft angles, corner fillets and conic forms.

•Constraint positioning at key points on a surface to control the wire passage at variable angles.

•Storage of modes and regime tables.

•Contour erosion or pocket machining.

•Storage of individual machine characteristics for wire travel checking ensures that the machine is not programmed outside its limits.

•Automatic offset and waster bridge management.

•Cyles time estimates for optimising workloads.

•Rendered and 3D views enable easier job visualisation.

•Progressive die forms accommodated by scale and stretch features.

•Full wire and head movement simulation.

•Definition of two completely different profiles at different Z heights to form a surface for EDM generation.

 
2D設計模組
3D實體模組
分析模組
電極模組
塑膠模座模組
沖壓模座模組
2D加工模組
3D加工模組
5軸加工模組
刀具路徑總管
高速加工模組
彩現模組
線切割模組
板金展開模組
本站最佳瀏覽視窗為1024*768
昱網科技股份有限公司 版權所有Copyright 2004
807高雄市三民區民族一路80號33F之2 / TEL:(07)226-6666 FAX:(07)226-3666
如有任何問題歡迎你與我們聯絡:info@sunspot.com.tw